Double station automatic power Slitter (double support)
Date: 2020-04-20 15:59:19Click: 1621Font-size: T|T
Related introduction
Zy80s-vc600-s80 double position automatic power Slitter (double support)
Product model
Zy80s-vc600-s80 double position automatic power Slitter (double support)
Width of incoming material: max700mm, maximum unwinding diameter: φ 1000mm, maximum winding diameter: φ 600mm, slitting speed 0-80m / min, slitting width accuracy with edge: ≤± 0.05mm, slitting width accuracy without edge: ≤± 0.3mm, slitting edge burr: ≤ 7um, edge serpentine variation: ≤± 0.05mm/m, winding uniformity: ≤± 0.4mm/roll.
Structure: turret thimble structure is adopted for unwinding, servo motor is used for active unwinding constant tension control, photoelectric travel correction control is adopted; two high-quality slip shafts are used for winding to ensure the tension of each pole piece is consistent after slitting; the appearance of positive and negative sides of pole piece is detected before slitting, and the ng part is pasted with marks after slitting, and angle wrapping cutting method is adopted for slitting, which is especially suitable for the slitting of zebra coated pole piece.
Equipment process: active unwinding - unwinding tension detection - automatic deviation correction control - CCD appearance inspection - active traction - corner cutting - winding tension detection - powder brushing dust removal - Labeling - winding up
Equipment advantages: the machine runs fast, realizes automatic winding and unwinding, automatic roll changing, saves labor, and has CCD appearance detection function, which can label the defective polar pieces.
Overall size of equipment: 12500 × 4500 × 2850 mm