Zy60d-vc600-s50 automatic power Slitter (CCD detection)

Product model

Zy60d-vc600-s50 automatic power Slitter (CCD detection)

Width of incoming material: max500mm, maximum unwinding diameter: φ 600mm, maximum winding diameter: φ 600mm, slitting speed 0-50m / min, slitting width accuracy with edge: ≤± 0.05mm, slitting width accuracy without edge: ≤ ± 0.3mm, slitting edge burr: ≤ 7um, edge serpentine variation: ≤± 0.05mm/m, winding uniformity: ≤± 0.4mm/roll.

Structural form: the unwinding adopts cylinder thimble clamping type, magnetic powder brake constant tension control, photoelectric travel correction control; two high-quality slip shafts are used to ensure the tension of each pole piece is consistent after slitting; the appearance inspection of positive and negative sides of the pole piece before slitting, and the ng part is pasted with marks after slitting, and the angle wrapping slitting method is adopted for slitting, which is especially suitable for the slitting of the pole piece after zebra coating.

Process flow of equipment: passive unwinding - unwinding tension detection - automatic deviation correction control - CCD appearance inspection - active traction - angle cutting - winding tension detection - powder brushing dust removal - Labeling - winding up

Equipment advantages: the machine is designed with multiple pole lug smoothing device, which can ensure that the pole piece after die cutting will not wrinkle and turn over during the cutting process, and has CCD appearance detection function, which can label the defective pole piece products.

Overall size of equipment: 4250 × 1800 × 2350mm